Bulk scrap in Hyderabad, priced by the tonne, collected on contract.
When a factory, a hospital or a campus generates scrap every week, the job stops being a pickup and turns into an arrangement. We quote against your monthly tonnage, hold a fixed slot with one person to call, and settle every load by NEFT against a GST invoice.
Free pickup
Doorstep collection across the GHMC limit, any day of the week.
Same-day
Call and we collect the same day.
Paid on the spot
Cash, UPI or bank transfer, immediately after weighing.
The full list, and what qualifies it.
Rates are indicative and move with the market. Call for today’s exact price on your material.

Heavy melting steel and MS offcuts
The bulk of most loads
Cast iron, machine beds and broken castings
Graded above general steel
Structural steel and dismantled fabrication
Cut to transportable lengths
Copper, brass and aluminium
Sorted and weighed at their own rates
Cable, busbar and electrical scrap
Copper recovered by stripping
Obsolete machinery and plant equipment
Dismantled on site
Racking, plate and warehouse steel
Cleared from the floor in one visit
Batteries and plant office e-waste
Kept out of the metal stream
What it looks like
Steel and MS
Iron
Cast iron
Industrial bulk
Four steps.
We do the heavy lifting.
Call or message with what you have. We quote, collect, weigh and pay, usually the same day.
Start now on +91 97004 36932Call or WhatsApp
Tell us what you have and where it is. Instant quote in under a minute.
We come to you
Free pickup at your home, office, warehouse or site, anywhere in the GHMC limit.
Weigh and price
Certified digital weighing in front of you. You see the weight, you see the rate.
Paid on the spot
Cash, UPI or bank transfer, immediately after weighing.
How a bulk arrangement works, from the first quote to settlement.
A rate against your tonnage
Tell us the material mix and the rough monthly tonnage and we quote against that rather than against a single pickup. Heavy, clean, well-sorted loads price better than light mixed ones, so the number reflects what is actually in the yard.
A fixed slot and one person to call
Weekly, fortnightly or monthly, whichever matches how fast the material builds up. One named contact and one scheduled day, so nobody has to chase a dealer to get the yard cleared.
Weighed on a certified scale
Every load is weighed on a certified digital scale in front of your staff, and the weighing ticket is handed over at the time of weighing rather than produced later from somewhere else.
NEFT against a GST invoice
Bulk loads are not cash jobs. We raise a GST-compliant invoice, transfer the amount by NEFT or RTGS, and send the invoice and weight slips through to your accounts desk.
Reviewed against the market, not frozen
A rate fixed for a year is a bad deal for one side or the other. We review on the interval you set and bring the market numbers to the review instead of renegotiating at every pickup.
Vendor registration and rate contracts
For institutions that buy and sell through tender, we can be listed as a vendor with company PAN, GST and bank details, and work to a signed rate contract with the paperwork your purchase team needs.
How scrap is billed, and what TDS means for your side.
Metal scrap is its own case under GST. Two notifications of October 2024 changed how a company selling scrap is billed, and both are worth knowing before a rate contract is signed.
Reverse charge when the seller is unregistered
Since 10 October 2024, when metal scrap under Chapters 72 to 81 is sold by an unregistered person to a registered buyer, the GST is paid by the buyer under reverse charge rather than by the seller, and it applies even if the seller is below the registration threshold. Where your entity is registered, you charge GST in the normal way and reverse charge does not arise.
Section 51 TDS of 2% between registered parties
The same date brought TDS under section 51 of the CGST Act to metal scrap. A registered buyer taking scrap from a registered seller deducts 2% TDS, worked out on the taxable value and not on the GST, in any contract above 2.5 lakh. It is 1% CGST plus 1% SGST within Telangana, or 2% IGST across states.
Where the deduction ends up
The 2% is not a cost. The buyer deposits it, reports it in GSTR-7 and issues a GSTR-7A certificate, and it is credited to your cash ledger, where it can be set off against your own GST liability. The invoice should show the deduction separately so your accounts desk can reconcile it.
What a rate contract should record
Which entity is registered and which is not, the GST rate on each material in the mix, whether TDS applies on the contract value, and how the weighbridge ticket, invoice and collection summary reach your accounts team. We confirm the invoicing and tax treatment in writing before the first load moves.
Batteries and e-waste are a separate route
Regulated e-waste and battery waste do not fall under Chapters 72 to 81, so the scrap-metal TDS and reverse-charge rules above do not cover them. They follow their own route under the E-Waste Rules 2022 and the Battery Waste Rules 2022, and we route those separately from the metal stream.
General information, not tax advice, and scrap metal is defined by Chapters 72 to 81 of the Customs Tariff Act, 1975. Sources: section 51 of the CGST Act, 2017, and the two notifications effective 10 October 2024. Notification 06/2024-Central Tax (Rate). Notification 25/2024-Central Tax.
Asked before.
Anything else, call us. Nobody minds a question before a pickup.
Is there a minimum tonnage?
There is no minimum on a one-off load, so a single lorry of steel is worth calling about. A standing arrangement becomes worthwhile once you are generating a regular monthly volume, and we will say so if one-off pickups suit you better.
How is a bulk rate decided?
By the material mix, how well it is sorted, the tonnage and how far the site is. Clean heavy melting steel and cast iron price differently from light mixed scrap, so one blended figure for a mixed load usually hides a discount. We quote grade by grade.
Do you issue a GST invoice and pay by bank?
Yes. Bulk loads are invoiced with GST and settled by NEFT or RTGS rather than cash. Tell us at the quotation stage whether your company is GST registered and we will confirm the invoicing and tax treatment in writing before the first load moves.
Can you be registered as a vendor for tenders?
Yes. We provide company PAN, GST details and bank details, sign a rate contract where one is required, and will work to the vendor documentation format your purchase or accounts team uses.
Will TDS be deducted on our scrap sale?
If both sides are GST-registered and the contract value is above 2.5 lakh, yes. A 2% TDS under section 51 is deducted at source on the taxable value, reported in GSTR-7 and credited to your cash ledger against a GSTR-7A certificate. If your entity is unregistered, the reverse-charge rules apply instead, and we confirm the treatment in writing before the first load moves.
Can the rate be revised during a contract?
Yes, and it should be. Metal prices move daily, so a rate held flat for a long term ends up favouring one side. We review on the interval you choose and bring the market figures to that review.
Not what you came for? We take 19 more categories.
Mixed loads are common. We sort on site and pay each material at its own rate.
Need this handled as a corporate contract? Offices, plants and institutions, on a schedule.
A standing pickup slot, one named contact, GST-compliant invoicing and the paperwork your accounts team asks for.
- See also
- Industrial & bulk
KGN Enterprises · 1-4-877/3, Bakaram, Kavadiguda Main Road, Hyderabad – 500020 · Open 24 hours, 7 days. Weighed on a certified digital scale, paid on the spot.
See our Google profile
